the temperature controller downward to open a small groove

Clicks:Updated:2013-10-19

1 , the installation location of the temperature controller downward to open a small groove ( to be able to burying depth ) to the ground, along the wall with the wire placed along the wall until the boiler has been lower ;
2, from the boiler under the wall to open a small groove in the position you want to qualify , the wire can be buried ;
3 , the wall tank line to use a small wire clamps tight ;
4 , the groove can be painted flat ;
5 , diameter 2 × 1.0 is appropriate, as long as you can continue to use .
Simple method does not affect flooring , careful not to engage in renovation work off the line . Units are different, in the decoration of the wiring can be yourself .
Boiler thermostat wiring position

1, in the bottom of the boiler about any selected connection port ;
2 , embedded rectangular box , and with a hole in the middle of the lid ;
3 , threading 2 × 0.75 and above diameter multi-strand twisted cord ( telephone lines, head lines can be, but two ) , threading indoor aside 0.5 meters , boiler 1.0m .
4 , will be reserved for wound into a group into the box , and then the same size hard foam sealed box ( lest someone pull ) .
Boiler thermostat instructions